Putting together my first kit, and all similar beginner tip/trick Reddit threads are dead to me 😤 So I’d love to get one going here! Any tips/tricks you have to help out??
Putting together my first kit, and all similar beginner tip/trick Reddit threads are dead to me 😤 So I’d love to get one going here! Any tips/tricks you have to help out??
Adding onto this a little bit, An hobby knife like an X-Acto works well to remove the remaining tabs from the sprue, but risks are a higher chance of cutting yourself and gouging out too much plastic in the part.
I personally use files for finishing touches. I use those GodHand nippers to cut the part off the sprue, intentionally leaving a good amount remaining flash. I go back in with the nippers to cut off the flash and use a coarse file to smooth out the blemish, and a fine nail buffing file to get a smooth surface.
https://www.amazon.com/Makartt-Professional-Supplies-Pedicure-Manicure/dp/B0BGBKFBYK/ref=sr_1_18?crid=199WUMBAWJEML&keywords=nail+buffer+file&qid=1686869365&sprefix=nail+buffer+file%2Caps%2C115&sr=8-18
For some of the younger people I help out with kits, I tell them to use even a nail clipper to remove the flash and it has pretty decent results!