What would do call this print quality issue, and how would you go about fix it?image John_Coomsumer ( @John_Coomsumer@beehaw.org ) 3DPrinting@lemmy.worldEnglish • 1 year ago message-square5arrow-up11
arrow-up11imageWhat would do call this print quality issue, and how would you go about fix it? John_Coomsumer ( @John_Coomsumer@beehaw.org ) 3DPrinting@lemmy.worldEnglish • 1 year ago message-square5
minus-square Gormadt ( @Gormadt@beehaw.org ) linkfedilinkEnglish2•1 year agoFirst some establing questions: What are your settings? What machine? What kind of filament? It looks like under extrusion but to properly diagnose it it will help to know the other info.
minus-square John_Coomsumer ( @John_Coomsumer@beehaw.org ) OPlinkfedilinkEnglish1•1 year ago-Sovol Sv06 with upgraded cooling to a dual duct 5015 -hatchbox grey PLA -settings are off the top of my head because the machine is in my office, but hotend 185 bed 70, ret dist .4, raft. -otherwise the prints are coming out in great quality, no stringing. Did a temp tower and overhang before to dial in the new PLA. -the machine sat turned off for a good month or so before swapping in the new PLA, so I might swap a new nozzle on and see if it improves.
First some establing questions:
What are your settings?
What machine?
What kind of filament?
It looks like under extrusion but to properly diagnose it it will help to know the other info.
-Sovol Sv06 with upgraded cooling to a dual duct 5015
-hatchbox grey PLA
-settings are off the top of my head because the machine is in my office, but hotend 185 bed 70, ret dist .4, raft.
-otherwise the prints are coming out in great quality, no stringing. Did a temp tower and overhang before to dial in the new PLA.
-the machine sat turned off for a good month or so before swapping in the new PLA, so I might swap a new nozzle on and see if it improves.