Finally decided I think I am going to get a Steam Deck. Decided to look at upgrading the hard drive, it is a little more compacted than I thought it would be. For those who have swapped, was it easy enough?

    • rotopenguin ( rotopenguin@infosec.pub ) 
      link
      fedilink
      English
      arrow-up
      1
      ·
      2 years ago

      Little pro-tip - I got a Corsair drive and tried putting it in external enclosure to copy to it, that didn’t work.

      These small Nvme drives are dram-less, so they borrow some memory from the host system. All of these drives have a fallback mode when they can’t borrow host memory, which is slower. Apparently, the fallback mode is so well programmed that drive can crash during large write sessions.

      It worked just fine once I put the new drive inside the Deck, and pulled data from the old drive sitting in the enclosure instead.

    • nocturne ( nokturne213@sopuli.xyz ) OP
      link
      fedilink
      arrow-up
      7
      ·
      2 years ago

      Yeah, I was watching the video. The first thing that gave me pause was the, “drain battery to 25% as a charged lithium battery puncture can bee dangerous.”

      And then I hate having to use the guitar picks to pry open stuff.

      That said, I used to build my own computers. I have installed new SSDs in both of my ps5s. But it is not something I do often.

      • It’s a precaution. If you were to damage the exposed battery it could cause it to heat up and probably catch fire.

        You do no want a lithium battery fire in your house.

        If you’re going to do it make sure you have enough time to do it all in one go so you don’t have to leave the back off.

        It’s not a long task, I think setting the blank drive up afterwards took longer than the actual drive swap

  • Fubarberry ( Fubarberry@sopuli.xyz ) 
    link
    fedilink
    English
    arrow-up
    5
    ·
    2 years ago

    It’s not hard at all, if you’ve done any kind of tech disassembly before you should be good. Just make sure you don’t strip the screws (don’t use a screwdriver that’s too small, make sure it’s all the way in the screws before turning it).

    You will have to either clone the drive or install SteamOS fresh on the new SSD from a USB drive. They may have fixed it, but originally the SteamOS installation/recovery USB had a software bug that would crash the wifi driver if you connect to a 5GHz wifi 6 network. So if you have a WiFi 6 network, I would suggest only connecting to the 2.4Ghz version of it until you’ve completed setup and downloaded updates.

    If you clone the drive you don’t have to worry about that, but sometimes after cloning you have to realize the cloned partitions to actually take advantage of the larger drive.

    If you run into any of those issues and need help, feel free to reply to me here and I’ll do my best to help out.

  • NaibofTabr ( NaibofTabr@infosec.pub ) 
    link
    fedilink
    English
    arrow-up
    4
    ·
    2 years ago

    Have you installed a Linux operating system before?

    The hardware swap is not difficult, but you do have to reinstall the OS on the new drive, so if you’re not already familiar with that process it may be a hurdle. The good news is there shouldn’t be any important data on it, so if you do have a problem you can just wipe it and start over.

    I bought the original largest model, and in less than 6 months decided I wanted more than the 512GB. I wish I had saved the $200 and bought the cheapest model. There’s no other appreciable difference.

  • neon_nova ( neon_nova@lemmy.dbzer0.com ) 
    link
    fedilink
    English
    arrow-up
    4
    ·
    2 years ago

    As others have said the microsd card is fine.

    But if you plan to use the steamdeck in desktop mode, the internal drive can fill up kind of quickly with random stuff.

    I thought it was easy enough to replace, but I used to be a computer tech in my old life.