• @GrapheneOS@grapheneos.social I think today my GrapheneOS tried to auto update itself, that’s what it usually does. The phone got a little bit hot as well, that’s also what normally happens. But after that my phone turned into a brick, the screen is black, and I can’t boot, not into recovery even. It’s just a brick now. Is this a known issue? Sorry I can’t really provide any logs for diagnostics. We’ll probably have to wait and see if more people have a similar issue.

    • @astroboy@fosstodon.org That’s extraordinarily unlikely and you’re likely misdiagnosing it.

      OS updates are tested on each device model before reaching Alpha and go through both Alpha and Beta testing before Stable. This OS update hasn’t reached the Stable channel yet.

      OS updates happen in the background and kick in after rebooting. There’s a toggle to automatically reboot after updates while idle in the System Updater settings but it’s disabled by default.

      If an update fails to boot, it gets rolled back.

      • @astroboy@fosstodon.org There’s a known upstream Android bug impacting 8th generation Pixels which can cause them to become unresponsive with a black or frozen screen. The device remains booted and functioning when that happens so trying to boot it isn’t going to work because it’s already turned on and still mostly functioning. You have to long press the power button to force the device off if you’ve encountered that issue. It might be a GPU bug introduced in Android 15 QPR2 but we haven’t determined it yet.

          • @astroboy@fosstodon.org Hold power for a minute or longer.

            Which device model do you have? Is it an 8th generation Pixel?

            There’s something wrong with 8th generation Pixels since perhaps around Android 15 QPR2 in March 2025 which can cause the device to become unresponsive until forced off. It can be a problem to get it forcefully turned off. It appears to be some kind of upstream Android bug or Pixel firmware bug. We don’t know if it happens more often with GrapheneOS. The May update will hopefully fix it.

          • @GrapheneOS Apparently I was holding down the wrong buttons. I now hold down the power + volume UP button, and my phone is working! But after the Sim Card pincode screen appears, the whole screen goes black again. So maybe that is indeed that upstream bug you were talking about. But how to fix it?

            • @astroboy Try plugging the device into a wall charger and then turning it off completely. Hold volume down while it reboots so it boots into fastboot mode instead of the OS. While it’s plugged in and in fastboot mode, turn off the device from there and let it charge for a while. Then, see if it works properly after it has been charged for at least around 10 minutes.

    • @xeekei Pixel 9a is a newly launched device which is not supported by mainline Android. It still has Android 15 QPR1 with the stock Pixel OS instead of Android 15 QPR2 and it’s the same with GrapheneOS. It does not receive the regular releases of GrapheneOS yet and does not have the full Android or GrapheneOS feature set. It will have mainline Android with the launch of Android 16 in June. Until then, it has special releases using a Pixel 9a device branch based on the upstream branch for it.