I recently bought a Steam Deck and I have a lapdock on the way, intending to use the Deck as a dual-purpose gaming handheld and laptop replacement. So on that front, I was wondering what more experienced users could tell me about using it.

I did read through the official FAQ, and a few questions pop up. In no particular order:

  1. Is there a way to boot the Steam Deck directly into desktop mode, without going through the Steam environment first? (Strictly as a time saver)
  2. In practice, how well does sudo steamos-readonly disable and installing things from pacman work out for you? In particular, I want to use PWAs For Firefox and it requires this package in order to work. Do packages actually get wiped with SteamOS updates, as the FAQ warns?
  3. Is it possible to re-enable the read-only filesystem after installing a package, to safeguard it from accidental changes?
  4. Any other tips, tricks or warnings you’d like to share.
      • Telorand ( Telorand@reddthat.com ) 
        link
        fedilink
        arrow-up
        6
        ·
        6 months ago

        Bazzite will present a similar experience to SteamOS. They’re both immutable/atomic in the same way, but Bazzite has the ability to persist some system changes via package layering, and distrobox allows for installing packages in a semi-traditional way.

        But I agree, if you want a more standard Linux experience, CachyOS and others would be better.

    • NeatNit ( NeatNit@discuss.tchncs.de ) OP
      link
      fedilink
      arrow-up
      4
      ·
      6 months ago

      Thanks for the advice. I’ll consider it long-term, but want to stick with SteamOS for now. I gave a more detailed reply to a different comment if you’re interested in reading it.

      • Hmm, yeah I read that. I think you are just not the target audience of SteamOS. It’s more or less meant for people who don’t want to tinker.

        If you’re already familiar with Cachy it’s probably a great choice. Personally I went with OpenSUSE which was quite a hassle to get set up like I want. Especially since I couldn’t be bothered to hook up a keyboard. But I think Cachy has all the stuff I had to add manually already integrated.

  • Fubarberry ( Fubarberry@sopuli.xyz ) 
    link
    fedilink
    English
    arrow-up
    8
    ·
    6 months ago

    For 2, there are ways to install packages without messing with the read only file system. Easiest ways are using nix packages or using distrobox to install non-flatpak software.

    So for the linked aur PWA package you provided, you could create an arch linux distrobox, enter it, install yay (or another aur helper), install firefox and your pwa package, and then use the distrobox-export --app <package> command to make the installed software directly runnable from the desktop.

  • Telorand ( Telorand@reddthat.com ) 
    link
    fedilink
    arrow-up
    6
    ·
    6 months ago
    1. Yes, kinda. This apparently breaks your ability to easily switch back to game mode, but you can still get back there by running the second command below and rebooting.

    to boot into desktop mode by default

    steamos-session-select plasma-persistent

    to boot into gaming mode by default (and to fix inability to go back to gaming mode from desktop)

    steamos-session-select gamescope

    1. It will last until each update. Updates happen via an A/B partition switch, so the other partition gets updated, then that one becomes the default for booting (both still technically boot, but the original image will be behind).

    2. If you mean accidental changes by you, then it would be steamos-readonly enable. Note that changes happen via a persistent OverlayFS. Re-enabling might remove that overlay and your changes. Test with something easy to see if it persists. Note point 2 about permanence.

    3. Don’t bother messing with the system files if possible. Try to use an AppImage or Flatpak instead, as they exist in userspace and will persist over updates. The issue is that it’s the core system files that are written to a new image each update, not your home directory. Your home directory and settings will persist.

    If you want something modifiable but still atomic, Bazzite is a good option. You can apply rpm packages via layering, and you can install packages from other package managers via distrobox. You’ll still have the safety of images as restore points. If you want a more traditional Linux experience, though, look into something like CachyOS.

    • NeatNit ( NeatNit@discuss.tchncs.de ) OP
      link
      fedilink
      arrow-up
      4
      ·
      6 months ago

      Thanks, awesome answers all around!

      Regarding another distro, I do use CachyOS on my desktop so that’s definitely an option, but for the time being I want to give SteamOS a fair shot before I go and install a different OS on it. There’s every chance I’ll cave and install CachyOS within a month or two.

      Don’t bother messing with the system files if possible. Try to use an AppImage or Flatpak instead, […]

      Yes, definitely; I was going to do that anyway. There are only a few corner-cases, like the PWAs For Firefox that I linked in the OP, where this isn’t possible or might require a lot more fiddling than I prefer. But in almost all cases, I can work with Flatpaks, AppImages, or through a web browser.

      Thanks for answering, I was honestly not sure I’d get much good info here but you proved me dead wrong :)

      • Telorand ( Telorand@reddthat.com ) 
        link
        fedilink
        arrow-up
        2
        ·
        5 months ago

        Good luck! Incidentally, if you do end up going to CachyOS, I like webapp-manager for PWAs; should be in the extra arch repos. I’ve tried a few flatpaks for creating the necessary shortcuts, and I haven’t found one that felt quite as nice. Do go try some, though, because maybe there’s one that works better for you!

    • Hexarei ( Hexarei@beehaw.org ) 
      link
      fedilink
      arrow-up
      1
      ·
      5 months ago

      It’s probably something like a Nexdock or similar. I’ve got one from Dopesplay for example - Easier if you look it up, but basically it’s a laptop with no brains that just acts as a dock for other devices

  • prole ( prole@lemmy.blahaj.zone ) 
    link
    fedilink
    arrow-up
    5
    ·
    5 months ago

    I am speaking from Bazzite experience so it might be slightly different, but I wouldn’t do #2. What I would do is install distrobox (pre installed on Bazzite, with boxbuddy for gui), create an Arch distrobox, and use that to access AUR.

    If you want to install a package, you layer it using rpm-ostree. Don’t fuck with the immutability imo

  • As long as you’re using and plugging in your steamdeck reasonably often(every couple of days) the suspend mode is fantastic and there’s little reason to ever do a full shutdown or reboot in my experience. Boot into desktop mode the first time, and then just use the suspend mode to stay there, switching to gaming mode only when you want to play games. It also doesn’t take very long to switch from gaming mode to desktop mode or vice versa, I find the main time killer is the initial boot up into gaming mode the first time after shutdown.
    Or you can just load games out of desktop mode, a recent update fixed a lot of the issues I had with the steam overlay not working in desktop mode and denying access to the powerful steaminput configuration options. That all works flawlessly now in desktop mode as well. I haven’t actually switched back to gaming mode for some time, since I use desktop mode to install games anyway and test the installation, it’s easier just to stay in desktop mode now.

    • NeatNit ( NeatNit@discuss.tchncs.de ) OP
      link
      fedilink
      arrow-up
      2
      ·
      edit-2
      5 months ago

      the suspend mode is fantastic and there’s little reason to ever do a full shutdown or reboot in my experience.

      Thank you, that’s quite useful to know!

      Slightly off-topic but you reminded me. Have you tried using Steam Deck as a “Steam Controller” for PC? I did look up an article on that once and at first glance it seemed to involve a bunch of caveats. Haven’t tried it properly yet.

    1. In practice, how well does sudo steamos-readonly disable and installing things from pacman work out for you? In particular, I want to use PWAs For Firefox and it requires this package in order to work. Do packages actually get wiped with SteamOS updates, as the FAQ warns?

    As far as I know, a new update of SteamOS will revert these changes back. However Steam has builtin support for Nix package system, where you don’t need to disable readonly filesystem and changes to this directory / package system stays intact even after an update. Two articles explaining how to do this at https://sadatdaniel.dev/2023/11/install-nix-package-manager-on-your-steam-deck/ (2023) and https://chrastecky.dev/gaming/persistent-packages-on-steam-deck-using-nix (2025). Check if a certain package is available under https://search.nixos.org/packages . Now, I never did that, as I never had a need for. I can’t say if this helps you with the specific package, but it might be useful for you to look into this.