Guys I truly don’t mean to spam the community but these are legit questions. Yesterday I posted about linux compatibility and computers and every single person gave me knowledge to use and you’re all awesome.

Now my question is, I will undoubtedly be purchasing an older machine, would an older but good running machine still be able to install the latest kernels or versions of distros or are you limited to older versions only, based on the era of your laptop or is it really about the hardware you have? I know ram, disk space, basic stuff like that matters with distros, but I know that will not be a problem. I guess I’m thinking beyond that like processors. are older processors or anything else hold certain machines from being compatible with the newest and greatest kernels? Thanks!

  • AFAIK if you buy any computer from within the last 20 years, there’s a good chance you can get a 6.X Kernel running on it. 32-bit support is fading out, though. If you buy a 64-bit computer, you’ll be able (with sufficient RAM and hard disk space) to install any modern distro on it.

    •  IsoKiero   ( @IsoKiero@sopuli.xyz ) 
      link
      fedilink
      English
      1811 months ago

      I’d say that single core performance and amount of RAM you have are the biggest issues with running anything on old hardware. Apparently, in theory, you could run even modern kernel with just 4MB of RAM (or even less, good luck finding an 32bit system with less than 4MB). I don’t think you could fit any kind of graphical environment on top of that, but for an SSH terminal or something else lightweight it would be enough.

      However a modern browser will easily consume couple gigabytes of RAM and even a ‘lightweight’ desktop environment like XFCE will consume couple hundred MB’s without much going on. So it depends heavily on what you consider to be ‘old’.

      The computer at garage (which I’m writing this with) is Thinkstation S20 I got for free from the office years ago is from 2011. 12GB of RAM, 4 core Xeon CPU and aftermarket SSD on SATA-bus and this thing can easily do everything I need for it in this use case. Browsing the web on how to fix whatever I’m working with at the garage, listen music from spotify, occasional youtube-video, signal and things lke that. Granted this was on a higher end when it was new, but maybe it gives some perspective on things.

  •  Atemu   ( @Atemu@lemmy.ml ) 
    link
    fedilink
    10
    edit-2
    11 months ago

    Make sure that device doesn’t require proprietary drivers (commonly WiFi or GPU). If the hardware in question needs those and you need the component to work, I wouldn’t take it for free because you’d be stuck with shitty support on an ancient kernel.

    Most commonly, thio affects broadcom WiFi and Nvidia GPUs.

    • I second that about Nvidia GPUs. While Linux hardware support is really good, there is plenty of common, mainstream hardware that never was and never will be supported by Linux, usually due to uncooperative manufacturers. For Nvidia, their non-free driver is terrible and the nouveau driver in Linux is hit-or-miss. (Note, many people use either of those successfully, but the likelihood of success drops rapidly with any of: multiple displays, the need to dynamically change outputs, multi-GPU Optimus hardware or even laptops in general, and fully functional hardware acceleration.)

      • While one should, ideally, use AMD over Nvidia with Linux. It sounds like OP is shooting for older hardware, so I’m going to assume GPU performance isn’t a significant consideration. Nouveau should be fine for regular desktop usage on older Nvidia cards.

        But trouble with assumptions. If you do want the most out of your GPU, AMD is the way to go.

  • Probably yes. As long as it’s 64 bit, it will run without issue, hardware dependant. For 32 bit machines, you have to be more careful. The 32 bit core duo and pentium m CPUs don’t support pae.

    Edit: First Gen Pentium M don’t show pae support as a flag but they do.support it. You have to set forcepae for some distros. I read the page incorrectly. Pentium M laptops that have 5 in their model number, like the 735 are second gen Pentium M

    https://reddthat.com/pictrs/image/eb8304a8-d5b6-494c-9fd0-96c03ab06766.png

  • If the computer is modern enough that you’d consider buying it to use, I can almost guarantee that you’ll be fine to run the latest distros. I just threw Arch + KDE on a 14ish year old laptop I found, and it runs so well that I may daily drive it for a while just for the hell of it.

    At worst, you may need a lighter-weight desktop environment (DE) than some of the pretty ones you see in screenshots. And those are simple to install and try out.

  • Yes, the linux kernel will work! I’d say it’s even more likely that wifi, soundcard, etc. work without any problems than if you’d buy a bleeding edge laptop (although these mostly also just work nowadays). The oldest machine I’ve got is a laptop from 12 years ago which easily runs modern linux, but even much older machines shouldn’t have a problem with that, at least not with the kernel.

  • Oh you again, yes Linux supports every normal hardware, and even a lot of crazy ones like Risc-V

    On Android the system is bundled with the firmware as it comes from the same people. And for some reason those people dont like providing updates for sane amounts of time, like… 20 years?

  •  nyan   ( @nyan@lemmy.cafe ) 
    link
    fedilink
    English
    611 months ago

    Nearly all hardware support is kept in the kernel until and unless it bitrots to the point of unusability. I’ve had no issues with a 5.10-series kernel on my 2008 laptop, and I don’t expect any issues when I finally get around to upgrading it to 6.x (well, except the usual tedium of compiling a kernel on a machine that weak).

      •  nyan   ( @nyan@lemmy.cafe ) 
        link
        fedilink
        English
        311 months ago

        The difference isn’t all that noticeable, to be honest, or at least I’ve never found it so. If you’re using older hardware, you’re going to get an older “experience” anyway. The most user-visible kernel improvements tend to be improvements in hardware support, which is irrelevant if your hardware is already fully supported. However, I don’t do anything fancy with my machines—no full-disc encryption or the like. I usually don’t even need an initram to boot the system. So maybe you would notice something if your machines were more complicated.

        (Note that the laptop I mentioned above started out with, um, a 3.x kernel? It gets a new one every year or so. The only kernel changes affecting it that were significant enough to draw my attention since 2008 were a fix in the support for the Broadcom wireless card it carries, and some changes to how hibernation works, which didn’t matter in the end because I basically never did try all that hard to get hibernation working on that machine.)

        • See I fear this, being stuck to only kernels up to a certain version. Because don’t the older ones lose support and stuff like that? how the heck do you maintain your system if the distro isn’t pushing anymore updates and such?

          •  nyan   ( @nyan@lemmy.cafe ) 
            link
            fedilink
            English
            311 months ago

            You’re unlikely to have issues unless an entire architecture loses support from your distro, and if you’re running x86_64, that isn’t going to happen for a long, long time. I’ve never been in a position where I couldn’t compile a new workable kernel for an existing system out of Gentoo’s repositories. The only time I’ve ever needed to put an upgrade aside for a few months involved a machine’s video card losing driver support from nvidia—I needed a few spare hours to make sure there were no issues while over to nouveau before I could install a new kernel.

            Note that you can run an up-to-date userland on an older kernel, too, provided you make sensible software choices. Changes to the kernel are not supposed to break userspace—that’s meant to keep older software running on newer kernels, but it also works the other way around quite a bit of the time.

  • How old is “older?”

    I run the latest Debian on a 10 year old Macbook Pro. Linux has given this laptop a second life as a lab machine - it’s still plenty fast enough and it has a really nice screen (Retina) which Debian gets right out of the box with no tweaking. The only thing I needed to do when installing Debian is manually get the drivers for the WiFi hardware during the install (although Debian has the non-free firmware by default these days, they aren’t permitted to distribute all firmware and the WiFi hardware in this machine unfortunately happened to be one of those).