My house has a sliding glass door as the main entrance and I need a solution to have it secure from tiny hands. My problem is it needs to be able to unlock and lock on both sides of the door so a pin drop or cross bar won’t work.

  • Not being able to exit your home in an emergency without a key is a serious safety problem. In most places it is not permitted.

    International Residential Code R311.4.4 “All egress doors shall be readily openable from the side from which egress is to be made without the use of a key or special knowledge or effort”. Most local codes are derived from this.

    • Andrew1030 ( Andrew1030@lemmy.ca ) OP
      link
      fedilink
      arrow-up
      2
      ·
      edit-2
      3 years ago

      Yes this is why I need it to be accessible on both sides of the door. 1 for emergency access and 2 so I and my partner can unlock it coming home from work if the other is sleeping edit added missing word

      • I guess I didn’t understand what you were describing. When we moved in to our house, the previous owners had a deadbolt that locked with a key on the inside instead of a thumb turn, and it was the only way to lock the door. This is a pretty bad idea since it creates a potential situation where you’re stuck inside your house, or have to find another exit. In some emergencies, seconds count. Even if you know how to open the door, you might have someone over who doesn’t, which is why fire codes are the way they are. Someone unfamiliar with the setup, panicking, in the dark, in a room full of smoke, needs to be able to escape without solving a puzzle.

        Because I already had experience with having to replace that lock with an appropriate one for an exit door, I jumped straight to the assumption that when you said “lock on both sides”, you were talking about a key, and not just a childproof latch of some kind. I have the privilege of not living with anyone who is a flight risk, so it’s easy for me to just dismiss it as unsafe. I looked at some of the solutions out there and they seem to be designed to stop toddlers with no dexterity, not an autistic person determined to turn all the things. Sorry if my answer was unhelpful; people are injured or killed every day because they created a situation they didn’t realize was hazardous until it was too late. My intention was only to prevent the downsides of locking the door this way from being overlooked.

        • Andrew1030 ( Andrew1030@lemmy.ca ) OP
          link
          fedilink
          arrow-up
          2
          ·
          3 years ago

          To be completely honest my only solution might be to rip out the door and put in a regular door so normal child locks will work. With home and safety checks we will be subjected to, having the door requiring a key on both sides won’t work and will be flagged as a danger. Thank you for your response all input has been extremely helpful including your insight

  • Mothra ( Mothra@mander.xyz ) 
    link
    fedilink
    arrow-up
    6
    ·
    3 years ago

    Sorry if this is an obvious question but since it’s the main entrance, you already have a key, right? You already have the means to lock and unlock this door in a childproof way from both sides. Usually childproof locks are for pantry doors and such.

    How come you need an extra layer of locking for the main door?

  • KittenBiscuits ( KittenBiscuits@lemm.ee ) 
    link
    fedilink
    English
    arrow-up
    5
    ·
    3 years ago

    You can get a lockset with a numerical keypad on both the inside and outside hardware. i.e. no inside knob on the lock for little fingers to let themselves out. It might technically be a fire hazard, though, unless you have an alternate means of quick escape. Keep a safety glass breaker tool by the door but up high or something.

    • Andrew1030 ( Andrew1030@lemmy.ca ) OP
      link
      fedilink
      arrow-up
      1
      ·
      edit-2
      3 years ago

      Yes the current lock is a simple toggle that grabs an edge of the door on the inside. There is a keyhole on the outside which pushes the lever up unlatching the clasp from the edge of the door edited spelling errors

    • Andrew1030 ( Andrew1030@lemmy.ca ) OP
      link
      fedilink
      arrow-up
      1
      ·
      3 years ago

      If I’m able to build a landing/porch on the outside this is the easiest solution. But at the moment my stairs make it 1.5 feet lower than the inside floor which means it’ll to high on the outside but to low on the inside.

      • intensely_human ( intensely_human@lemm.ee ) BannedBanned
        link
        fedilink
        arrow-up
        1
        ·
        3 years ago

        Ah. Sorry I missed that.

        Remote control then. Getting into the house requires push of a button or typing in code. Getting out can be done with manual turn of deadbolt because inside you’re high enough to reach:

        • fire failsafe because you’ve got mechanical control when trying to exit even if electricity’s out
        • harder to copy your key because it’ll be a key fob or something
        • if you do lose a key you can simply de-authorize it instead of having to change locks
        • probably cost you a few hundred to a thousand for the hardware and install labor. Just my guesses at price haven’t looked into it
    • Andrew1030 ( Andrew1030@lemmy.ca ) OP
      link
      fedilink
      arrow-up
      1
      ·
      3 years ago

      Deadbolt at the top can cause the door to shift out of its tracks when pulled on and if it’s at the bottom it’s easily accessible to tiny hands playing with it. If I place it more in the top centre it’ll be Duffy to reach with a key unless it’s electronic… and that comes with many other issues