Just looking for advice/opinion. I bought from ebay, what i thought was an x220 Thinkpad with 8G of RAM…turned out only to have 4. I left a bad review but will keep the machine. I put Arch/Sway anyway.
I want to add RAM…i think it can go up to 16. I looked on line and i think it would be about $50 to buy the memory…so i thought o would find an online tutorial and add the memory myself…is this a bad idea?
I couldn’t buy an 8 and a 4 to make 16 with the 4 already there? I’ve never done this before, but the machine was cheap…so i figure why not learn something?
Learning always is a good idea.
You have two ram slots only. You could do 8 and 4gb but that’s not advised. Better use same amount and also same frequency etc. Did you check out the ifixit link?
I will…there is already 4, so i thought…add 12!
This should be interesting. I will check the link…i still have to order the memory.
First make sure that you got compatible memory! Also you could try to find used modules, they are available on craiglist and similar sites.
No such thing as a 12GB stick. You could start with adding an 8GB, then in the future replace the 4 with another 8. (Assuming it’s not 2+2 in there currently).
I’m running my x220 with 4+8 (12gb) and there is no issues :)
I rarely require more than 8gb but sometime do memory intensive job and it’s stable, the CPU is more of a bottleneck.
Iirc it’s possible to run 2x16gb but there is some BIOS trickery involved.